• Amana GT01H GenericTenna 2.4 GHz RF transceiver antenna module front view
  • Internal electrical junction box view showing mounted Amana GT01H card
  • Multi-pin connection header pins on Amana GT01H wireless antenna card
1 3

Amana GT01H Commercial GenericTenna 2.4 GHz RF Transceiver Antenna Module | Plug-in Wireless Receiver Card for Amana Eden EMS & Wireless Thermostats

Amana GT01H Commercial GenericTenna 2.4 GHz RF Transceiver Antenna Module | Plug-in Wireless Receiver Card for Amana Eden EMS & Wireless Thermostats

$158.28 USD
$158.28 USD
Sale Sold out
Shipping calculated at checkout.

The Amana GT01H GenericTenna RF Transceiver Antenna Module is the essential hardware gateway that enables 2.4 GHz wireless connectivity for Amana PTAC units. Designed to plug directly into the main control board header of Amana PTAC chassis, the GT01H allows the air conditioner to send and receive two-way Radio Frequency (RF) signals to and from wireless wall thermostats, occupancy sensors, and room energy management devices.

By installing the GT01H, property managers and contractors can link wireless thermostats (such as the Amana DS01G or DSA02NO), wireless balcony door switches (Amana DD01E), and DigiWatt lighting relays (Amana RKLC10M70) without running low-voltage thermostat wire through guest room walls.

Installation Note: Plugs directly into the dedicated multi-pin antenna header on the PTAC control board inside the front cabinet. No external power supply or wire soldering required.

View full details

The Wireless Gateway for Amana Eden Energy Management & Smart Controls

Modern hospitality HVAC operations depend on wireless energy management to cut utility overhead and streamline guest room climate control. The Amana GT01H GenericTenna antenna card acts as the central RF communication hub for the PTAC chassis, converting standard board signals into two-way 2.4 GHz wireless data streams that interface with the entire Amana Eden EMS ecosystem.

Unlocking Complete Wireless Component Connectivity

Installing the GT01H antenna card instantly connects your PTAC unit to:

  • Amana DS01G Wireless Motion Thermostats: Enables wireless temperature control, PIR occupancy detection, and automated setback routines.
  • Amana DD01E Wireless Door Switches: Receives open-door signals from entry doors or balcony glass sliders to pause HVAC operation during open-door energy waste events.
  • Amana RKLC10M70 DigiWatt Lighting Relays: Transmits unoccupied status commands to de-energize non-critical 115V lamp and appliance branch circuits.
  • Amana Central Eden EMS Network: Communicates with property-wide energy management software for remote monitoring and central front-desk overrides.

Simple 2-Minute Plug-and-Play Board Installation

  • Zero Wire Fishing: Replaces hours of labor-intensive drywall drilling and low-voltage cable pulling with a 2-minute board header plug connection.
  • Compact Internal Footprint: Mounts neatly inside the PTAC electrical control box housing under the front cabinet cover, fully protected from dust and guest access.
  • Low Voltage / High Range: Operates directly off board power while delivering a robust 2.4 GHz RF signal that easily penetrates guest room walls and metal enclosures.

2.4 GHz 802.15.4 RF Transceiver Architecture: High-reliability wireless protocol designed for commercial building controls.

Direct Board Header Interface: Plugs directly into the dedicated multi-pin connection header on Amana PTAC control boards.

Compact Plug-In Card Design: Fits entirely within the PTAC internal electrical junction box enclosure.

Multi-Device RF Pairing Support: Receives simultaneous RF signals from thermostats, door switches, and lighting relays.

Powered via Board Bus: Draws low-voltage power directly from the PTAC mainboard (no external batteries or transformers needed).

Model SKU GT01HOfficial Amana GenericTenna RF Module
Communication Protocol 2.4 GHz 802.15.4 RF WirelessConnects natively with Amana RF thermostats & sensors
Interface / Connection Dedicated Multi-Pin Control Board Header Plug-and-play installation inside control box
Power Source Powered via PTAC Mainboard No batteries or external wiring required
Transceiver Range Up to 35–50 Feet Line-of-Sight RF Covers large guest rooms and adjoining balconies
Device Compatibility DS01G, DSA02NO, DD01E, RKLC10M70Central antenna hub for all Eden RF accessories
System Compatibility Amana J-Series & K-Series PTACs Adds or expands wireless RF capability
Mounting Enclosure Internal PTAC Control Box Hidden safely behind front cabinet cover
Warranty Coverage 1-Year Manufacturer Warranty Backed by Amana HVAC / Goodman Manufacturing

What's Included

  • Amana GT01H GenericTenna 2.4 GHz RF Transceiver Card
  • Control Board Header Connection Harness / Pins
  • Installation & RF Setup Instruction Sheet
Required & Complementary Accessories

System Compatibility & Accessory Setup:

  • Wireless Motion Thermostat (Recommended): Amana DS01G Wireless Occupancy Sensing Thermostat
  • Wireless Standard Thermostat (Alternative): Amana DSA02NO 2-Way RF Wireless Digital Wall Thermostat
  • Wireless Door Switch (Optional): Amana DD01E Wireless Door Switch Sensor
  • DigiWatt Lighting Relays (Optional): Amana RKLC10M70 30A Line-Voltage Lighting Relays
  • PTAC Chassis Compatibility: Amana J-Series and K-Series Commercial PTAC Units

coming soon

Frequently Asked Questions

Q1: What is the purpose of the Amana GT01H GenericTenna antenna card? +

A: The GT01H is an RF transceiver module that plugs into the PTAC control board. It enables the PTAC unit to communicate wirelessly via 2.4 GHz RF with wireless wall thermostats (DS01G/DSA02NO), balcony door sensors (DD01E), and lighting relays (RKLC10M70).

Q2: Where is the GT01H antenna module installed on the PTAC? +

A: The GT01H plugs directly into a dedicated multi-pin connection header located on the main electronic control board inside the PTAC electrical box (behind the front cabinet cover).

Q3: Does the Amana GT01H require batteries or external power wiring? +

A: No. The GT01H receives low-voltage operating power directly through its connection header on the PTAC mainboard. It requires no batteries, external transformers, or extra wiring.

Q4: Is the GT01H antenna required if I am using a wired wall thermostat? +

A: No. If you are using a standard 24V hardwired wall thermostat (like the Amana PHWT-A150H) connected via thermostat wire, the GT01H antenna card is not required. It is only needed for wireless RF control setups.

Q5: How do I pair devices to the PTAC after installing the GT01H card? +

A: Once the GT01H is plugged in, put the PTAC mainboard into RF binding mode using the front panel buttons, then trigger the pairing command on your wireless thermostat or door sensor to complete binding.